فایل نهایی و کامل دیکشنری مهندسی خودرو
دریافت فایل
حجم: 2.48 مگابایت
توضیحات: با تشکر از سایت www.cargeek.ir
دریافت فایل
حجم: 2.48 مگابایت
توضیحات: با تشکر از سایت www.cargeek.ir
Types of bodies: shell forming the exterior of a car.
Hatchback: two-door passenger compartment with a door at the back.
Sports car: small, two-seated automobile.
Four-door sedan: passenger compartment with four doors and four side windows.
Limousine: large, six-seated passenger compartment.
Convertible: car with a removable roof.
Hardtop: two-door passenger compartment.
Van: small vehicle used to carry baggage; a small van.
Pick-up truck: a small truck.
Automobile engine: apparatus that converts fuel to mechanical energy to power a car.
Air filter: device that removes impurities from air passing trough it.
PVC hose: vinyl tube.
Filter hole: cylindrical part forming the opening of the oil container.
Cylinder head cover: removable cover on the upper part of the motor.
Spark plug cable: cable connecting the spark plug to the distributor cap.
Spark plug cover: spark plug cover.
Spark plug: ignition device of an internal combustion engine.
Exhaust manifold: system that collects spent gases.
Dip stick: instrument that measures the level of oil in a motor.
Flywheel: wheel that, while turning, regulates the speed of the engine.
Engine block: set consisting the motor, the clutch and the gearbox.
Exhaust pipe: pipe through which spent gas is expelled.
Oil filter: device that removes impurities from oil passing through it.
Gas line: network of hoses that transports the gas.
Gas pump: device that moves gas from the gas tank to the engine.
Oil drain plug: cylindrical part that is removed to drain oil from the engine.
Radiator hose: treated rubber tube that connects the lines of a combustion engine.
Pulley: small wheel with a grooved rim, bitted with a belt, that turns the cooling fan.
Fan belt: piece of rubber that wraps around the pulleys and turns the cooling fan.
Water pump: device that circulates water through the radiator.
Fan: apparatus that feed in oxygen the engine's combustion.
Alternator: generator that enables current in both directions.
Distributor: case that enables engine's ignition.
Valve spring: mechanism that keeps the valve closed.
Filters for small motors: apparatus used to remove suspended particles from a gas or liquid.
Cover: piece of metal closing the filter.
Housing: metal casing protecting the filter.
Foam pad: a mass of spongy material used for filtering a liquid or gas.
Filter: surface pierced with little holes.
Washer: round, thin metal part, hollow un the center.
Gasket: lining that seals a joint.
Filtering element: part through which liquid passed to be clean of its impurities.
Pan: small container.
Cover: piece of metal closing the filter.
Wing nut: winged piece of metal, to be turned by thumb and finger.
Automobile battery: group of similar elements that generates an electric charge.
Negative terminal: place where a current conducting wire, the cathode, is attached.
Separator: partition that separates the compartments of a battery.
Plates and separator: thin, flat, rigid separator sheet.
Battery case: casing that protects the parts of a battery.
Positive terminal: place where a current-conducting wire, the anode, is attached.
Vent caps: row of screwed-on cylindrical pieces that close the openings of a battery.
Automobile spark plug: electric part generating sparks to ignite an internal combustion engine.
Ceramic insulator: pottery support for the parts that conduct electricity.
Terminal: place where a current-conducting wire is attached.
Spline: hollow channel.
Resistance: device that controls the strength of the current.
Ground electrode: current device that unites the electrodes.
Spark plug gap: space separating the current conductors.
Center electrode: central current conductor.
Gasket: spot where two part join together.
Spark plug body: metal part of the spark plug.
Hex nut: hexagonal piece of metal used to screw in a spark plug.
Types of brakes: apparatuses used to slow or stop a moving vehicle.
Drum brake: mechanism that slows and stops a car by fiction, by pression brake shoes against a drum.
Drum: cylindrical part attached to the wheel, against which the brake shoes are pressed to stop the car.
Brake lining: frictional part on the outside edges of the brake shoes.
Return spring: part of the brake mechanism that returns the brake shoes to their initial position.
Piston: cylindrical part that transmits the pressure to and receives pressure from the brake shoes.
Wheel cylinder: type of roller that applies a uniform pressure to the wheel then the brake is activated.
Brake shoe: part on which the brake lining is mounted.
Brake pads: part activated by the piston.
Wheel hub: central part crossed by the axel.
Stud: metal pin.
Disk: round, flat, piece of metal, pressed against the wheel to slow or stop the car.
Brake line: system liquid-transporting tubes.
Splash shield: protector that prevents dirt from fouling the braking system.
Disk brake: mechanism that slows and stops a car by friction, by pressing a disk against the wheel axel.
Tire: hollow, elastic casing enclosing an air-filled cavity.
Tread pattern: raised designs on the surfaces of a tire.
Side wall: side of the tire.
Radical body cords: arched frame of the tire.
Special high stiffness apex: filling material.
Bead wire: wire moulding a tire.
Belt: layers of different thicknesses that cover the frame of the tire.
Tread design: part of the tire that comes into contact with the road.
دریافت فایل
عنوان: دیکشنری انگلیسی به فارسی در مهندسی خودرو
حجم: 1017 کیلوبایت